Preventative Maintenance

In order to maximise lifespan, and minimise down time, all MATRIX equipment requires regular cleaning, and maintenance items performed on a scheduled basis.

STRENGTH EQUIPMENT

Daily Maintenance

• Clean entire machine using water and mild detergent such as “Simple Green”, or other Matrix approved solution (cleaning agents should be alcohol and ammonia free). For weight stack shields use glass cleaner such as “Windex”.

Weekly Maintenance

• Visibly inspect belt and cable assemblies for signs of wear – tearing, frayed edges, cracked or missing jacketing. Immediately replace any belt or cable with any apparent damage to it. Any belt replacement must be done using torque specifications below.

For belting with the “fold over” type clamp, use this specification:

The bolts (with blue Loc-tite – this is important as it acts as a lubricant and is related to the torque spec) should be tightened to 40 inch pounds using a torque wrench. The bolts should be tightened in a uniform pattern.

For belting with the “barrel” type clamp, use this specification:

The bolts (with blue Loc-tite – this is important as it acts as a lubricant and is related to the torque spec) should be tightened to 25 foot pounds using a torque wrench. The bolts should be tightened in a uniform pattern.

Monthly Maintenance

• Clean and lubricate guide rods. Use Teflon based spray lube such as “Super Lube”, or any other Matrix approved lubricant.
• Check any adjustable seat/pad mechanism for proper locking pin operation, and lubricate sliding mechanism.

Quarterly Maintenance

• Hardware check – using proper tools, ensure that all accessible fastener items are securely snug on the equipment.
• When replacing a belt, or checking bolt tightness on belt clamps, the Matrix torque specifications MUST BE FOLLOWED, NO EXCEPTIONS.